2-Person Patio Acacia Wood Bench with Backrest and Armrests - Free Shipping

Tools Required:

• Phillips screwdriver (preferably electric or with a ratchet mechanism for ease)
• Adjustable wrench (optional, depending on hardware)

Package Contents:

• 1 x Acacia Wood Garden Bench
• Assembly Hardware Pack (includes screws, bolts, and washers)
• Instruction Manual

Step-by-Step Assembly:

Step 1: Unboxing and Preparation

• Carefully unpack all components from the package.
• Lay out all parts and hardware on a flat surface near your assembly area.
• Ensure all parts listed in the instruction manual are included.

Step 2: Preliminary Check

• Inspect the wood for any visible damage or defects.
• Verify that all necessary hardware (screws, bolts, washers) is present.
• Read through the instruction manual thoroughly before beginning assembly.

Step 3: Assembly Process

1. Attach the Legs to the Seat:

   • Position the seat (flat surface) upside down to expose the holes for attaching the legs.
   • Take one leg and align it with the pre-drilled holes on the seat.
   • Insert screws (provided) through the holes in the leg into the seat.
   • Use a Phillips screwdriver to tighten the screws securely. Repeat this step for the other leg.

2. Attach the Backrest:

   • Position the backrest vertically behind the assembled seat.
   • Align the backrest with the pre-drilled holes on the seat.
   • Insert screws through the holes in the backrest into the seat.
   • Tighten the screws using a Phillips screwdriver.

3. Attach the Armrests:

   • Take the armrests and position them on each side of the seat.
   • Align the armrests with the pre-drilled holes on the seat and backrest.
   • Insert screws through the holes in the armrests into the seat and backrest.
   • Tighten the screws securely using a Phillips screwdriver.

4. Install the Reinforced Crossbar:

   • Locate the reinforced crossbar (if included) and position it between the legs of the bench for stability.
   • Align the crossbar with the pre-drilled holes on the legs.
   • Insert screws through the holes in the crossbar into the legs.
   • Tighten the screws using a Phillips screwdriver.

5. Final Check:

   • Once all components are securely attached, carefully flip the bench over onto its legs.
   • Ensure all screws are tightened properly to prevent any wobbling or instability.

Step 4: Finishing Touches

• Clean the assembled bench with a soft cloth to remove any dust or debris.
• Optionally, you can apply a wood sealant or outdoor paint to protect and customize your bench.

Maintenance Tips:

• Regularly inspect and tighten screws if necessary, especially after exposure to weather.
• Clean the bench periodically to maintain its appearance and longevity.
• Avoid prolonged exposure to harsh weather conditions to prolong the life of the wood.

Safety Precautions:

• Use caution while handling tools and hardware to prevent injury.
• Assemble the bench on a stable and flat surface to ensure stability during and after assembly.

Note: If you encounter any difficulties during assembly or have questions about the process, refer to the provided instruction manual or contact customer support for assistance.